CSNJ481 100A Board Mount Current Sensors Impulse Board Mounted CSN Series

CSNJ481 100A Board Mount Current Sensors Impulse Board Mounted CSN Series

CLOSED LOOP SENSORS
Closed loop current sensors measure AC, DC and impulse currents over 0-25, 0-50, 0-100, 0-600 and 0-1200 Amp ranges. The CSN Series is based on the principles of the Hall effect and the null balance or zero magnetic flux method (feedback system). The magnetic flux in the sensor
core is constantly controlled at zero. The amount of current required to balance zero flux is the measure of the primary current flowing through the conductor, multiplied by the ratio of the primary to secondary windings. This closed loop current is the output from the device and presents an image of the primary current reduced by the number of secondary turns at any time. This current can be expressed as a voltage by passing it through a resistor.

FEATURES
1 Current sensing up to 1200 amps
1 Measures AC, DC and impulse
currents
1 Lowest cost/performance ratio
1 Rapid response, no overshoot
1 High overload capacity
1 High level of electrical isolation
between primary and secondary
circuits
1 Small size and weight

CSNJ481

Hall Effect AC Current Sensor Impulse

100A Hall Effect Current Sensor

CSNJ481 100A Board Mount Current Sensors Impulse Board Mounted CSN Series Images